Pressure washing a driveway cost is simply the amount you’re charged to have it cleaned by a high-pressure water spray. This will eliminate dirt, stains, and grime. Prices can vary, depending on how big and how dirty a driveway is.
Want a clean driveway for a little cost? Power washing is the best way to make a driveway look completely new. Quick and requiring little use of chemicals.
The average cost of power washing a driveway is usually between $100 and $350. The overall charges will depend upon the area that needs to be cleaned, as well as the kind of stain present on it. A worthwhile investment to keep your home’s curb appeal intact.
Cost to Pressure wash a driveway
Driveway pressure washing costs usually range from $155 to $190 and around $0.25 to $0.35 per square foot. Some companies may offer a flat rate between $100 and $200, depending on the size of the driveway.
However, the cost can go up from $0.40 to $1.25 per square foot if special treatment is needed in the driveway, hand-scrubbing with a bleach solution to remove mold and mildew.
Note that bleach cannot be used in a pressure washer as it may damage the equipment. Instead, specialized detergent and cleaning solutions are designed for pressure washers. However, they will not be as effective at killing mold.
New driveways or parking lots may even have cheaper costs, especially if only spot treatments are required, such as oil or saw cut removal.
Power washing vs. pressure washing costs
Both power washers and pressure washers work by the tough currents of high-pressure water to do their job, but the power washing is in reality hot water instead of cold that is added to the equation. A version of cleaning, which gentle washing is, which means it is being done with ecological cleaning products and low pressure. This is revealed in the pressure used.
- Power washing requires about $0.35–0.77 per square foot, utilizing hot water, and is outstanding at taking dirt, salt, mold, grime, fungus, and mildew out of exterior surfaces. Moreover, the process involves such issues as chewing gum and grease stain removal from the driveway, too. By the way, it can also eliminate weeds using the water’s high temperature and high pressure for that task.
- Pressure washing needs about $0.08–0.20 per square foot and employs cold water at high pressure to clean houses, siding, and concrete areas such as sidewalks, fences, decks, driveways, patios, and pathways. Pressure washing is usually much longer in these cases.
Key Factors Affecting Pressure Washing Costs
Driveway Size and Material
Pressure washing a driveway usually costs between $0.20 and $0.40 per square foot. Bigger driveways are going to be more expensive to pressure wash, simply because more time and effort are involved. Some companies will charge by the square foot for bigger driveways and flat fees for smaller driveways.
Other materials used to pave driveways include concrete, asphalt, gravel, pavers, and brick, which vary in cleaning processes as well as prices. For instance, gravel and paver driveways usually cost $135 to $210 more pressure wash compared with other materials.
Driveway Condition
The condition of the driveway will influence the cleaning process and the products needed. The driveways in poor condition might require additional cleaning solutions, degreasers, mold removers, or even surface repair materials, which raises the cost.
If the driveway is already damaged, then pressure washing might further damage it and thus necessitate repairing and extra expenses.
Labor Costs
Most companies charge between $60 and $125 per hour for labor. The cost will be higher, however, for additional work that may be done, such as house washing or working in a hard-to-reach area. Even at this cost, the professional will generally be less expensive and time-consuming than the professional a DIY project.
These elements—size, material, condition, and labor—each determine the total pressure washing cost for your driveway.
Additional Costs and Considerations
Preparation
Preparation may also take the required time and effort, adding to the expense of the whole project. Top surfaces must have all dirt and grime wiped away with a broom for the pressure washer. If any type of degreasers are applied, they should be worked in using a deck brush, lengthening labor.
Treating stains or removing weeds from cracks or between pavers may require additional work, increasing labor costs.
Large cracks in your driveway may cost anywhere from $1,000 to $3,700. The smaller cracks are usually filled for $100 to $300 and added to the preparation of the surface for pressure washing.
Driveway Sealing
Sealing a driveway after washing with pressure is not necessary, but it is done to make it look good and preserve it in a better state from further deterioration. Sealing costs range from $250 to $770 depending on the materials used and the size of the driveway.
Sealing will require 24 hours before reusing the driveway again; so prepare accordingly.
Additional Pressure Washing Services
| Additional Service | Average Cost (Materials and Labor |
| Fencing | $150 to $300 |
| Gutters | $50 to $300 |
| Patio or deck | $200 to $400 |
| Roof | $250 to $700 |
| Siding | $150 to $1,200 |
Different Types of Driveways and Their Pressure Washing Costs
The cost of pressure washing a driveway will depend on the material used. Different types of driveways require a different cleaning approach, which will affect labor and material costs. Here are the average pressure washing costs for different driveway materials:
| Driveway Type | Average Cost |
| Asphalt | $125 to $195 |
| Brick | $130 to $200 |
| Concrete | $120 to $190 |
| Gravel | $135 to $210 |
| Paver | $135 to $210 |
Do I need to pressure wash my driveway?
You will need to pressure wash your driveway if it appears dirty, stained, or even has mold and mildew. In due course, dirt, oil spots, and debris pile up, which does make your driveway look old and messy. Pressure washing will help clean out the stains on your driveway, and it’ll look new again.
Pressure washing would also wash weeds or dirt lodged inside the cracks, depending upon if there were some. Only a regular driveway, which keeps it washed every 1-2 years would be good if nothing else comes out major: cracks or damages appear and is fixed first.
DIY vs. Professional Driveway Pressure Washing
Several factors often lead to considering a decision about using DIY services and hiring an expert for a driveway pressure washing process.
DIY Pressure Washing: The saving is on labor if you can do it on your own. Renting or buying a pressure washer may cost $40 to $100 per day. This, however, requires a lot of time and effort to use the equipment, but if you are not a professional, there’s a big chance you might damage it or not clean it at all.
Hiring a Professional: A professional pressure washing service has the experience, efficiency, and the right equipment. They understand how to handle different driveway materials and can safely remove stains, mold, and mildew. Of course, professional services usually cost a bit more; they start at around $120 for smaller driveways made of lighter materials, while longer driveways made of denser materials may run closer to $350. It saves you the frustration of doing it yourself and also ensures the job is done right.
How to Save Money on Driveway Pressure Washing
Saving money on pressure washing driveways requires a strategy of smart planning and DIY efforts besides choosing the best service. There are ways, however, where you can control your budget the best way:
- DIY Pre-Cleaning: Sweep loose debris and clear everything from the driveway before hiring a professional or renting equipment. This step saves time and labor in pressure washing, which decreases the total cost.
- Request Multiple Quotes: Get quotes from different companies to compare prices. This helps you find the best deal for the same service. Some companies may offer discounts or promotions, so don’t hesitate to ask.
- Bundle Services: Many pressure washing companies offer discounts if you book multiple services, such as washing your driveway, patio, or house together. Bundling can reduce your overall cost.
- Schedule During Off-Peak Times: Some businesses offer lower rates during slower seasons, such as fall or winter. Scheduling during these times may help you save money while still getting your driveway cleaned.
By using these strategies, you can keep the cost of driveway pressure washing down while maintaining a clean driveway.
Final Words
Pressure washing your driveway is a good way to keep it clean and in good condition. The cost varies, but proper planning can make it affordable. Regular pressure washing will help preserve your driveway and prevent long-term damage. It is worth hiring a professional or doing it yourself.
FAQS
Q1. How much does it cost to power wash a driveway?
The cost of the power for washing a driveway is about $120 to $350. Prices vary according to the size and condition of your driveway.
Q2. Can I pressure wash my driveway myself?
Yes, you can rent a pressure washer and clean it yourself. Be sure to use the right equipment so that you don’t damage the driveway.
Q3. How often should I power wash my driveway?
You should power wash your driveway every 1-2 years. It keeps it clean and helps it to stay in good condition.
Q4. Can pressure washing remove oil stains?
Yes, pressure washing can remove oil stains. You just need the proper cleaning solutions, though. It might take you more treatments on tougher stains.
